Chapter 2: Installation
1
Caution: To avoid damaging the motherboard and its components, please do not use a force greater than 8 lb/inch on each mounting screw during motherboard installation.
Installation Instructions
Install the I/O shield into the chassis.
I/O Shield
2
3
4
5
Locate the mounting holes on the motherboard. Refer to the layout on the previous page for mounting hole locations.
Locate the matching mounting holes on the chassis. Install standoffs in the chassis as needed. Align the mounting holes on the motherboard against the mounting holes on the chassis.
Stand Off
Install the motherboard into the chassis carefully to avoid damage to mother- board components.
Insert a Pan head #6 screw into a mounting hole on the motherboard and its matching mounting hole on the chassis, using the Philips screwdriver.
6
Repeat Step 4 to insert #6 screws to all mounting holes.
7
Make sure that the motherboard is securely placed on the chassis.