SVAT Electronics CLEARVU10 instruction manual Connecting and Powering on

SVAT ELECTRONICS

now you can see

CONNECTING AND POWERING ON

1.Insert the power supply wire into the rear DC 12V port on the DVR Insert the power cord into the power supply.

3.The DVR will power on and you will see a startup screen that detects and checks the status of hard drives.

4.The DVR will begin normal operation and will show the default display of all 8 channels.

2.Plug the power cord from power supply into the power outlet. We recommend using a surge protected power bar and/or Uninterrupted Power Supply (UPS) backup to prevent damage to your DVR system.

NOTE: When powered on for the first time, the CLEARVU10 will automatically begin recording if cameras are connected. The DVR will continue to record on this setting until it is manually changed to a different mode.

CLEARVU10 17