SVAT Electronics CLEARVU10 instruction manual Now you can see

SVAT ELECTRONICS

now you can see

6.Continue to click and drag until all desired areas are within blue areas on the grid.

7.To exit this screen, right click the mouse anywhere on the screen. A menu will pop up with the options SELECT ALL, DELETE ALL, CANCEL, and SAVE & EXIT.

8.SELECT ALL will cover the entire screen with orange squares, completely enabling motion activated recording. DELETE ALL will cover the entire screen with blue squares, disabling motion activated recording on the entire monitoring area. CANCEL will disregard any changes you have made and return to the MOTION SENSOR menu. Clicking SAVE & EXIT will save your changes and take you back to the MOTION SENSOR menu.

9.Repeat steps 1-8 for all other cameras, as needed.

10.When you have made all the desired changes to the MOTION SENSOR menu, click APPLY. If you wish to exit without saving changes, click in the top right corner of the window.

11.After clicking APPLY, click in the top right corner of the window to exit the CAMERA menu and return to the GENERAL menu screen.

12.You will be prompted to save these changes

NOTE: In order for these settings to take effect, you must create a motion detection schedule for each camera in the RECORD menu. Please refer to MAKING CHANGES TO THE ACTIVATION MENU, pg.67 for more information.

CLEARVU10 42