SVAT Electronics CLEARVU10 Identify this channel, Ambient light available, Color CCD

Models: CLEARVU10

1 120
Download 120 pages 41.95 Kb
Page 114
Image 114

6.TROUBLESHOOTING

SVAT ELECTRONICS

now you can see

Before contacting technical support, please use follow the troubleshooting tips below for solutions to common problems.

 

- Make sure your TV/monitor is on the correct video input channel. This is NOT channel 3. Common terms for

 

this channel is INPUT, AV CHANNEL, LINE 1, LINE 2 and AUX. Please use your TV or VCR manual to correctly

No picture/signal:

identify this channel.

 

- If your camera is connected to a VCR/DVR, make sure that it is properly connected to your TV/monitor.

 

- Check all connections to make sure they are secure and properly connected.

 

- Check your power supply to ensure that the camera is powered up.

 

 

 

- Make sure your camera is not aimed at direct sunlight.

Picture is too bright:

- Adjust the sunshade by sliding it forwards to block out excess light.

- Make sure nothing is obstructing the CDS sensor on the camera. If the CDS sensor is blocked, night vision

 

 

mode will be active and may produce extra light in your camera’s picture.

 

- Move your camera to another location.

 

 

 

- If using at night, make sure your camera’s subject is no more than 15ft away (may vary based on amount

 

of ambient light available).

Picture is too dark:

- If using during the day, your camera may not be getting enough light. Adjust the sunshade by sliding it

backwards to let in more light.

 

 

- Check the brightness and contrast settings on your TV/monitor

 

- If your camera is connected to a VCR/DVR, check the brightness and contrast settings on the VCR/DVR

 

- Move your camera to another location.

Night Vision is

- The night vision turns on automatically when light levels drop. Try the camera in a pitch black setting. The

not working:

area that it is in may have too much light and may not activate the sensor.

 

 

7. Specifications

OUTDOOR CAMERA

 

 

Camera Type

Bullet

Image Sensor

1/4" Color CCD

Resolution

420 TV Lines

Outdoor Use

Yes

IP Rating

IP65

Focal Length

3.6mm

Focus Type

Fixed

Night Vision

Yes

Number of IR LEDs (and Range)

........................................12, up to 15ft

IR LED Control

Automatic (CDS Sensor)

Min. Illumination

0 lux

IR Wavelength

850nm

Video Output

60ft 4 PIN DIN to RCA (male) Video/Power Wire

TV System

NTSC

Microphone

No

Motion Detection

No

Viewing Angle

60 Degrees

Electronic Shutter

1/60 ~ 1/100000 sec

BLC

No

AGC

Automatic

ELC

Automatic

Line Lock

No

Iris Control

No

White Balance

Automatic

Sun Shield

Yes

IR Cut Filter

No

Housing Material

Anodized Aluminum

Housing Color

Midnight Black

Signal/Noise Ratio

>48dB

Camera Bracket

Yes

Operating Temperature

-14°F ~ 122°F

Operating Humidity

98%

Camera Power Input

DC 12V 300mA

Power Adapter Input

120V 60Hz

LED Power Indicator

No

Dimensions

5.5" x 5" x2.44"

Weight

0.85lbs (with stand)

CLEARVU10

114

 

 

Page 114
Image 114
SVAT Electronics CLEARVU10 Identify this channel, Make sure your camera is not aimed at direct sunlight, Color CCD