SVAT ELECTRONICS

MAKING CHANGES TO THE MOTION SENSOR MENU

now you can see

 

1.After saving any desired changes to other menus, click the MOTION SENSOR title on the left hand side of the window.

2.You will see a list of each camera, its sensitivity level, and an AREA SETUP button.

3.To make changes to the sensitivity level, use the mouse to click the sensitivity level (1, 5, etc) of the camera you wish to change. You will see the outline of the status turn green.

4.Use the buttons to choose a new level. The sensitivity ranges are between 1 and 10, with 1 having the lowest sensitivity to movement (meaning a lot of motion

is required to trigger recording) and 10 having the highest sensitivity to movement (meaning that minimal movement is required to trigger recording). The default for each camera is 5.

TIP: You can enable and disable specific areas of your monitoring locations to detect motion. For example, if you have a camera monitoring a high-traffic hallway with several entrances, you can go into the AREA SETUP menu for each camera and disable areas so that movement from specific entrances does not trigger recording. For more information, refer to ADJUSTING AREA SETUP, below.

CLEARVU10

40

 

 

Page 40
Image 40
SVAT Electronics CLEARVU10 instruction manual Making Changes to the Motion Sensor Menu