SVAT Electronics CLEARVU10 instruction manual Camera Menu

SVAT ELECTRONICS

now you can see

AUTO BRIGHTNESS: Can be set so that the LCD screen turns off after a certain period of inactivity. Recording will continue during this time. You can set the monitor to turn off after 10, 20, 30, 40, 50 or 60 minutes. Choosing “OFF” will disable auto brightness, meaning that your monitor will constantly remain on unless it is manually shut off.

MAIN DISPLAY OFF: When set to ON, the DVR will turn and remain off for the duration of time specified in the FROM and TO status box underneath. When set to OFF, the LCD screen will only deactivate in accordance with the AUTO BRIGHTNESS setting, or when the screen is turned off manually.

FROM: Only active when the MAIN DISPLAY OFF is set to ON. This is the start time for the screen saver to be activated.

TO: Only active when the MAIN DISPLAY OFF is set to ON. This is the time for screen saver to deactivate and the LCD monitor to turn back on.

TIP: You can manually turn the LCD monitor on and off by pressing on the DVR’s button panel. Recording will continue.

CAMERA MENU

The camera menu allows you to make changes to the following: CAMERA TITLE, COLOR SETUP, PTZ SETUP, and MOTION SENSOR. The CAMERA TITLE menu allows you to personalize the on-screen title of each camera as well as whether the camera will be displayed in covert mode. The COLOR SETUP menu is where you to make specific changes to the brightness, contrast, tint, and color of each camera individually. PTZ SETUP configures settings for PTZ cameras (not included). MOTION SENSOR allows you to set each camera’s sensitivity to motion.

CLEARVU10 34