SVAT Electronics CLEARVU10 instruction manual Making Changes to the Activation Menu

SVAT ELECTRONICS

now you can see

NOTE:

This DVR can record up to 120 Frames Per Second (FPS), which is spread out among all 8 channels. At the bottom of this menu screen you will see a “frames remained” counter. If the number beside “frames remained” is a positive number, this means you may be able to raise the FPS of any of your cameras for smoother recording and playback.

If this number is a negative number, it means you have the DVR set to record more than 120FPS, which is not possible. You will have to lower the FPS of various camera channels until this number reaches zero or more. You will NOT be able to press OK and save your changes until this number is above zero.

MAKING CHANGES TO THE ACTIVATION MENU

1.Click the ACTIVATION title at the top of the screen.

2.If you have chosen WEEKLY under SCHEDULE

MODE in the RECORDING OPERATIONS menu, you will need to choose the day of the week which you would like to edit.

3.Each camera is listed down the left hand side of the grid, with the time selection bar displayed above the grid. The time selection bar is displayed as a 24 hour clock, with the first block (0) representing 12 – 1 AM and the last block (23) representing 11 PM – 12AM.

4.Use the mouse to click the first (or only) hour of time you wish to edit.

CLEARVU10 67