SVAT Electronics CLEARVU10 instruction manual Adjusting Area Setup

ADJUSTING AREA SETUP

1.Click the AREA SETUP button of the camera you wish to change.

2.The camera will be displayed full screen and will be orange in color with a light blue grid covering the entire frame.

3.By default the entire frame is set to detect motion (indicated by orange shading). To change this, you can deselect specific areas.

4.To deselect areas, click a square on the grid that is in the area you want to deselect. Hold the click button down and drag the mouse across the desired area.

5.You will see a box appear on screen as you are dragging. Everything within this area will NOT trigger motion recording (indicated by blue shading). When the area you want is inside the box, let go of the mouse button. The squares will then turn blue.

SVAT ELECTRONICS

now you can see

CLEARVU10 41