SVAT Electronics CLEARVU10 instruction manual System Menu, Making Changes to the DATE/TIME Menu

	SVAT ELECTRONICS
SYSTEM MENU	now you can see

The SYSTEM menu is where you make advanced changes to the accessibility of the DVR. The submenus within the SYSTEM menu are DATE/

TIME, NETWORK, MAIL, USER MANAGEMENT, SYSTEM MANAGEMENT, and CONTROL DEVICE. The DATE/TIME menu allows you to change the date and time and sync the DVR to the official time when connected to the Internet. The NETWORK menu displays your personal settings that make it possible to view your DVR over the Internet. The MAIL menu configures the settings for the DVR to send alert messages to individual email addresses. USER MANAGEMENT allows you to create and set permission levels for different users. SYSTEM MANAGEMENT displays various versions of the DVR as well as the ability to update firmware or restore factory defaults. The CONTROL DEVICE menu allows you to set multiple DVRs to be used with a single remote.

MAKING CHANGES TO THE DATE/TIME MENU:

1.Click the SYSTEM button.

2.Click the DATE/TIME title on the left hand side of the window.

3.To navigate through the DATE/TIME menu,

use the mouse to click the status (OFF, ON, etc) of the setting you wish to change. You will see the outline of the status turn green.

4.When you have made all the desired changes to the DATE/TIME menu, click

APPLY. If you wish to exit without saving

changes, click in the top right corner of the window.

NOTE: Each of the settings within the DATE/TIME menu are described in detail below.

CLEARVU10 45