SVAT Electronics CLEARVU10 Formatting the DVR’S Hard Drive, Click the Start button next to Format

SVAT ELECTRONICS

now you can see

NOTE: When a RECORD TIME LIMIT is set, the OVERWRITE feature will automatically become set to ON and can not be changed unless you change the RECORD TIME LIMIT status to OFF.

RECORD TIME LIMIT: In accordance with certain local or organizational requirements and data protection laws, it may be necessary to limit the amount of footage being stored on the DVR. The RECORD TIME LIMIT refers to the amount of time that the data will be stored on the DVR before being erased or replaced. You can set the recording limit from between 12 hours – 1 month, or turn this feature off entirely.

•EXAMPLE: The RECORD TIME LIMIT is set to 1 Month, and you begin recording on January 1st. On February 1st, the DVR will begin to overwrite (hour by hour) all recorded footage that took place on January 1st. On February 2nd, the DVR will begin to overwrite (hour by hour) all recorded footage that took place on January 2nd.

OVERWRITE: Can be turned ON or OFF. The overwrite option determines the actions that the DVR will take when the hard drive becomes full. If set to ON, the DVR will overwrite data when the hard drive is full, beginning with the earliest recorded footage. When turned OFF, the DVR will halt recording when the disk becomes full and no footage will be overwritten or erased. Recording will stop, and the DVR’s buzzer will be activated.

FORMATTING THE DVR’S HARD DRIVE

If necessary, all recorded footage on the DVR can be erased by selecting the FORMAT option.

1. Click the START button next to FORMAT.

NOTE: Formatting the DVR erases all recorded footage. Your recording and system settings will NOT be erased. If you wish to restore your DVR’s settings to its factory defaults, please see UPDATING THE SYSTEM MANAGEMENT MENU, pg.54.

CLEARVU10 61