SVAT Electronics CLEARVU10 Its camera is displayed on screen, Button will be grey, Exit button

1	CHANNEL SELECTION BUTTONS
	These buttons work in the same way as the DVR’s button panel in
	Live Display Mode. When in full screen mode, you can click each
	number to see that camera in full screen. Also, when Sequence
	mode is selected in the software, the buttons will turn blue when
	its camera is displayed on screen.
2	STATUS BUTTON
	Indicates the connectivity status of the DVR. If connected, the
	button will be light blue. If you are not connected to the DVR, the
	button will be grey.
3	ALARM BUTTON
	Controls the alarm outputs.
	TALKBACK BUTTON
	Allows you to communicate with your DVR via the remote
	software. Press and hold this button while speaking into your PC’s
	connected microphone to send audio to the DVR’s internal speaker.
	AUDIO BUTTON
	Can be turned ON or OFF by clicking. When ON, you will be able to
	hear live audio from audio equipped cameras (not included) and
	the DVR (if a microphone is connected, not included). Note that
	only one channel can be listened to at a time.
4	MINIMIZE BUTTON
	Minimizes the remote viewer to your computer’s taskbar.
5	EXIT button
	Closes the window and ends the remote viewing session.
6	DATE/TIME STATUS
	Displays the current date and time.
7	SEARCH BUTTON
	Clicking this button enters the Search mode of the DVR, allowing
	you to play back previously recorded footage. For more information
	on Search Mode, see USING THE REMOTE, pg.100.

SETUP BUTTON

Enters the Connect Management and Configuration Areas so that the PC can access the DVR.

DVR SETUP BUTTON

Accesses the setup menu and allows you to make changes to the Record, Camera, Sound, Event/Sensor, and System menus.

	SVAT ELECTRONICS
	now you can see
8	DVR DROP DOWN LIST
	Select the DVR you wish to view from a list of your personal DVR
	systems.
9	CONNECT BUTTON
	After choosing a DVR from the dropdown list, choosing
	CONNECT loads the DVR into the Remote Viewer software.
	DISCONNECT BUTTON
	Clicking DISCONNECT will end your DVR viewing session.
10	FULL SCREEN DISPLAY BUTTON
	Displays the selected camera in full screen mode.
	16 SCREEN GRID DISPLAY BUTTON
	Separates the screen into a 16 screen grid.
	QUAD SCREEN DISPLAY BUTTON
	Displays up to 4 cameras simultaneously.
	9 SCREEN GRID DISPLAY BUTTON
	Displays up to 8 cameras simultaneously.
11	SEQUENCE BUTTON
	Automatically cycles through the cameras one at a time and
	displays each on screen for a set period of time.
	MANUAL SWITCH BUTTON
	When in a multi-screen display, pressing the button allows you to
	manually change the camera arrangement of the live view screen.
	FULL SCREEN BUTTON
	Enlarges the live display to fit the width and height of the
	computer monitor.
12	SAVE TO AVI BUTTON
	Saves the live video occurring on screen as an .avi file and places it
	in the designated Save folder.
	EVENT VIEWER BUTTON
	Displays all events which have occurred (motion, video loss) since
	logging on to the program. You can choose an event from the list
	and replay that specific footage.
13	PTZ CONTROL BUTTONS
	Pressing the centre PTZ button allows you
	to control the movement of a Pan/Tilt/Zoom
	camera (not included with the system).

CLEARVU10 78