SVAT Electronics CLEARVU10 instruction manual Setting UP Your DVR to Send Email Alerts

SVAT ELECTRONICS

now you can see

9.Enter the DynDNS address (example: myname1234.dyndns.org) by clicking each letter individually.

10.The button allows you to move between capital letters and lowercase and accesses the character menu for periods. The button can be used to delete letters.

11.When you have entering the DynDNS

address, click to exit the onscreen keyboard.

12.Make sure that the checkbox next to DDNS at the top of the screen is checked if it is not already.

13.Click APPLY and allow the DVR to restart.

14.Now you can access the DVR by entering the DynDNS address into the Internet Explorer address bar.

SETTING UP YOUR DVR TO SEND EMAIL ALERTS

When the DVR is properly connected to the Internet, the system will be automatically configured to send email notifications without any need to enter any mail server settings. Email notifications will be sent according to the settings you have created previously in the E-MAIL NOTIFICATION MENU.

NOTE: In order to receive email alerts, a valid email address must be assigned to a USER ID and the email notification option for that user must be set to ON. If you have not set this up previously, refer to MAKING CHANGES TO THE USER MANAGEMENT MENU, pg.47 for instructions on enabling email alerts.

You must also have notifications enabled in the E-MAIL NOTIFICATION MENU. For more information on making changes to the E-MAIL NOTIFICATION and enabling notifications, please see pg.59.

CLEARVU10 91