SVAT Electronics CLEARVU10 instruction manual Sound Menu, Making Changes to the Audio Menu

SOUND MENU

The Sound menu contains the AUDIO and BUZZER submenus. This menu allows you to make changes to audio settings on the microphone as well as turn the beeping sounds of the monitor and remote ON or OFF.

MAKING CHANGES TO THE AUDIO MENU

SVAT ELECTRONICS

now you can see

1.From the GENERAL menu, Click the SOUND button.

2.Click the AUDIO title on the left hand side of the window.

3.To navigate through the AUDIO menu, use the mouse to click the status (OFF, ON, etc) of the setting you wish to change. You will see the outline of the status turn green.

4.Use the buttons to choose the preferred setting.

5.When you have made all the desired changes to the AUDIO menu, click APPLY. If you wish to exit without saving changes, click in the top right corner of the window.

NOTE: Each of the settings within the AUDIO menu are described in detail below.

LIVE AUDIO: Can be turned ON or OFF. Turning this option ON means that you will be able to hear sound from audio equipped cameras (if connected, audio equipped cameras are not included) through the speaker on the DVR.

AUDIO MONITORING CHANNEL: Allows you to select the camera which will play audio out of the DVR’s speaker. Note that audio equipped cameras are not included with this system. Audio monitoring only works with Channels 1-4. Any other channels will have their audio recorded, but will not have the option to be hooked up for live audio monitoring.

CLEARVU10 43