SVAT Electronics CLEARVU10 instruction manual Making Changes to the Alarm Input Menu

SVAT ELECTRONICS

now you can see

SMART ALARM: Can be turned ON or OFF. This feature sets the DVR to monitor the hard drive to detect any problems or errors that might be developing. If the DVR detects an error, it will sound an alarm.

CHECK INTERVAL: Allows you to set a daily schedule for the DVR to enable Smart Disk monitoring. If the SMART ALARM (above) is set to ON, the DVR will scan for errors at the time period indicated. If any are detected, it will generate an alarm.

MAKING CHANGES TO THE ALARM INPUT MENU

1.After saving any desired changes to other menus. Click the ALARM IN title on the left hand side of the window.

2.You will see a window open with 8 alarms listed. You will also see the column for OPERATION, and a column for TYPE.

3.The OPERATION column allows you to enable or disable up to 8 alarms. Use

the buttons to enable or disable each alarm.

4.The TYPE column allows you to set whether each alarm is N/O (Normally Open) or N/C (Normally Closed). Use N/O in a situation (for example) where a door is continuously open. An alarm will occur when the door is closed. N/C should be used in a situation (for example) where a door is to remain closed. If the door is opened, an alarm will sound.

NOTE: The ALARM IN and ALARM OUT menus configure settings for an external alarm device (for example, a motion sensor) or an independent alarm which will sound when an event is detected. The setup and activation processes of these devices will very from model to model, so please refer to your sensor or alarm’s instruction manual for proper setup.

5.When you have made all the desired changes to the ALARM IN menu, click APPLY. If you wish to exit without saving changes, click in the top right corner of the window.

MAKING CHANGES TO THE ALARM OUT MENU

1.After saving any desired changes to other menus, click the ALARM OUT title on the left hand side of the window.

2.You will see a screen pop up with the 8 channels listed. You will see the choice to have the alarm triggered by video loss or motion.

CLEARVU10 57