11–Exchanging Data with a Computer

NOTE

If there is no stereo master, an error message appears.

3Use the Ô/keys, the DATA wheel and the F3 and F4 keys to edit the name of the stereo master file being exported (See “Editing names” on page 43).

4After setting the name, press the F2 (EXEC) key. A stereo master file is exported as a 16-bit, 44.1-kHz, stereo WAV file to the FAT partition. The file name of the exported file is the name set in step 3 above plus the “.WAV” extension.

6Use the computer to copy the stereo master file from the WAVE directory on the FAT partition of the unit to the computer.

7After copying finishes, disconnect the unit from the computer using the proper procedures and then remove the USB cable (see “Disconnecting” on page 93).

NOTE

To cancel exporting, press the F1 (BACK) key.

5Connect this unit to a computer using the USB cable (see “Connecting with a computer” on page 92).

TASCAM DP-004 101