TIP

•Use the track 1 PAN knob to set the stereo position of the track signal.

•If you are not satisfied with the recorded sound, follow the procedures above again from the beginning. If you are satisfied with this recording continue to the next section.

Adding another recording (1)—record guitar to track 2

Now, you will record lead guitar on track 2 while listening to the rhythm guitar on track 1. This time, you will need to change the track 2 record source.

1Press the ASSIGN key to open the INPUT ASSIGN screen.

2–Quick Start Guides

The input channels (INPUT A or INPUT B) that are the recording sources for each track are shown. In the initial setting, INPUT A is assigned as the recording source for tracks 1 and 3, and INPUT B is assigned as the recording source for tracks 2 and 4.

2Press the F4 () key to select TRACK 2to change its current input channel from the default of IN B.

3Turn the DATA wheel to set the input to IN A.

TASCAM DP-004 21