2–Quick Start Guides

TIP

This unit can also be powered by a PS-P520 power adapter (sold separately) (see “Connecting an AC adapter” on page 36).

CAUTION

Do not remove the batteries or disconnect the power cable while the unit power is ON. If you do so, the unit cannot shut down properly and all unsaved settings and recorded data will be lost. Lost data cannot be restored.

The included alkaline batteries are for confirming operation of the unit and might not last very long.

3Close the battery compartment cover after install- ing the SD card and batteries.

4Connect headphones to the /LINE OUT connector.

Headphones

CAUTION

The volume adjustment dial is small and does not have any indications. Before turning the power ON, always turn it in the direction of the arrow until it stops to minimize the volume. Sudden bursts of loud sounds can cause hearing damage and speaker damage, for example.

TIP

You can also attach an amplifier or speakers with built-in amplification to monitor through speakers.

5Press and hold the POWER key on the top panel until TASCAMappears on screen (or the POWER key indicator lights green).

After starting up the Home Screen appears on the display.

POWER indicator

12TASCAM DP-004