Right side panel | Left side panel |
jUSB connector
Connect the unit to a computer using the included USB cable. This allows to sharing, importing and exporting files between the unit and the computer, including backup of the song data. (See “Connecting with a computer” on page 92.)
kDC IN 5V connector
Connect a dedicated power adaptor
l
Set this switch to match the input signal to the INPUT A jack on the rear panel. For mic or line signals, set it to MIC/LINE. For electric guitars and basses that are connected directly, set it to GUITAR.
;
/LINE OUT connector
This stereo minijack connector can be used to connect headphones or an amplification and monitoring system to allow the stereo bus signal to be monitored. When the metronome is on, the metronome can also be heard.
zVOLUME dial
Use this to adjust the volume output from the 
/LINE OUT connector.
32TASCAM