QSG 1–Playback and mixing

First, we will play the demo song on the included SD card. The SD card with the demo song is shipped already installed in the battery compartment on the bottom of the unit, but we will start by explaining how to insert an SD card here.

Preparing to listen to the demo song

1Open the battery compartment and insert the SD Card into the slot.

2–Quick Start Guides

CAUTION

Do not insert the card backwards or apply unnec- essary force. This could damage the slot or card.

Do not remove the SD card when the unit’s power is ON. Make sure the unit power is OFF before you remove the card. If you remove the SD card while the power is ON, all recordings and settings since the last time the unit was shutdown or a song was saved will be lost. Lost data cannot be recovered.

NOTE

To use a new SD card or card that has been used with another device with this unit, it is necessary to format it first. A screen prompting you to format it appears if you insert such an SD card.

2Insert four AA batteries into the compartment, paying attention to the plus/minus (+/–) orienta- tion. This unit can use alkaline or NiMH batteries.

TASCAM DP-004 11