the way left (bounced to track 1 or 3) or all the way
right (track 2 or 4). Use theknob to adjust the overall level.
6After returning to the start of the song, press the playback (Á) key while pressing and holding the record
TIP
If it is possible that you might need the original tracks at some later time,
Confirming the result
Raise the bounce destination track LEVEL knob (turn other track LEVEL knobs all the way down) and the MASTER LEVEL knob, and start playback from the beginning of the song. If you are not satisfied with the result because, for example, the balance between instruments is poor, or the pan settings are wrong, use the undo function (see “Undoing the last operation (single undo)” on page 66).
If you are satisfied with the result, press the REC MODE key to open the RECORDER MODE screen and select MULTI TRACK, then press the HOME key to return to the Home Screen.
After bouncing tracks, you can make new recordings over the other tracks.
Locate and search functions
Direct locate function
This is the way to locate a specific position in a song. The current recorder position is shown at the top of the display as “hours: minutes: seconds: frames” (there are 30 frames per second). You can move the transport location to a specific time by inputting it here.
1Use the F1 (DIGIT) key to move the cursor (underline) between the time divisions. You can edit the value at the cursor positions. The seconds are selected in the following figure.
TASCAM