Preparing the power and SD card
Installing an SD card
An SD card is used as recording media for recording and playback.
•• Cards that comply with SD and SDHC standards can be used.
•• Cards should be at least 512 MB in size.
•• A list of SD cards that have been tested with this unit can be found on the TASCAM web site (www.tascam.com).
Insert the SD card into the SD card slot inside the battery compartment on the bottom of the unit.
1Make sure the unit power is OFF. Open the battery compartment and remove the batteries if they are inside.
2Insert the SD Card into the slot as shown in the following illustration until it clicks into place.
3Replace the batteries if you are using them and close the cover.
Ejecting the card
Push an inserted card in further to eject it.
34TASCAM