For example, if you press the REC keys for track 1, track 2 and track 3 in that order, track 1, which was pressed first, will no longer be in record standby, but track 2 and track 3, which were pressed afterwards, will be in record standby.
2Set the recording level. Turn the (INPUT A or INPUT B) LEVEL knob to adjust the input level of the input channel. Watch the display meters and the OL indicator above and to the left of the LEVEL knob while setting the level suitably. At the same time, confirm that sound heard from the headphones is not distorted.
NOTE
The meter for the track that the input signal is assigned to moves simultaneously with the corresponding input meter (A or B).
OL indicator
The OL indicator lights if the input is too loud. If
the OL indicator stays lit even when you lower the LEVEL knob, lower the output level on the signal source connected to the input.
Overload 
warning bar
3Press the playback (Á) key while pressing and holding the record
4Press the stop (ª) key to stop recording.
5To return to the starting point of the recording, press the key while pressing and holding the stop (ª) key. (This is the Last Recording Point (LRP) function.)
To go to the beginning of the song (00:00:00:00),
press the Ô key while pressing and holding the stop (ª) key. (This is the Return To Zero (RTZ) function)
6Press the playback (Á) key to play the recorded
TASCAM