processed further or combined with other recordings (see “Exporting a stereo master” on page 100).
NOTE
Only one stereo master can be made in a song at a time.
Before you start mastering, set the mastering end point. The time between the song’s zero point (00:
00:00: 00) and the OUT point will be recorded as the stereo master. Ordinarily, the end point of the song is set as the OUT point. In this case, the time at the OUT point is the length of the song. Use the following procedures to set the OUT (end) point.
1Press the IN/OUT key to open the I/O SETTING screen.
2Play the song back, and press the F4 (OUT) key at the position where you want the stereo master end point. “SET OUT!” appears and this position is set as the OUT point.
TIP
You can also set the OUT point when playback is stopped by pressing the F4 (OUT) key.
3 Press the HOME key to return to the Home Screen.
NOTE
For how to adjust the OUT point and for other functions, see “Setting IN and OUT points” on page 73.
TASCAM