NOTE

INT.MIC B-Low, INT.MIC B-Mid, INT.MIC B-High change the sensitivity of the built-in mics. Set it according to the loudness of the subject being recorded.

If you are not sure which setting to use, choose INT. MIC B-Low. If the input level is too low after adjusting it later, return to this screen and change the setting to INT. MIC B-Mid. If the input level is still too low, change this

setting to INT.MIC B-High.

7After changing the setting, press the HOME key to return to the Home Screen.

NOTE

The MODE item on the INPUT SETTING screen is used to set the input monitoring mode. Set to STEREO, input signals from INPUT A and INPUT B channels are output separately on the L and R channels, respectively. Set to MONOx2, input signals from both INPUT A and INPUT B channels are output as a combined mono signal from both the left and right channels.

Loading a song file

After listening to the demo song, follow these procedures to load SONG001 to record your song.

1 With the transport stopped and the Home Screen

2–Quick Start Guides

open, press the MENU key to open the MENUscreen.

2Use the DATA wheel to select SONGand press F4 (¥) to open the SONGmenu screen.

3Use the DATA wheel to select LOADand press F4 (¥) to open the SONG LOADscreen. A list of the songs appears.

TASCAM DP-004 17