2Turn the DATA wheel to change the value above the cursor. When adjusting, the value will carry over automatically when it reaches the highest or lowest value in a field. For example, when turning the DATA wheel to increase the value in the seconds field, the number will change from 59to 0and the minutes value will increase by one. The time display blinks when using the DATA wheel. The blinking stops about two seconds after moving to the new position.
3Press the F1 (DIGIT) key to move to a different time division and turn the DATA wheel to change the value.
4After setting the desired time value, press the playback (Á) key to start playback from that position.
Use simple key operations to return to the top of a song or to the position where recording last started.
Return To Zero (song beginning at 00:00:00:00)
Press the Ô key while pressing and holding the stop (ª) key.
Last Recording Position (the position recording last started)
Press the key while pressing and holding the stop (ª) key.
This function is useful when you want to record the same passage again.
TIP
RTZ and LRP below the Ô and keys are abbreviations for Return To Zero and Last Recording Position, respectively.
72TASCAM