Playback (either TAPE I or TAPE II) 2

B DC B DC

AA E F

ATo stop playback

Press the stop button (H).

BTo stop playback temporarily Press the PAUSE button.

To resume playback, press the PAUSE button again, or press the play button (h or y).

<While playback is paused, pressing the play button whose direction is opposite to the indicator (h or y) on the display, will switch the playback direction. This does not release the pause function. Press PAUSE or the same play button (h or y) again to start playback on the other side of the tape.

CFast forward/Rewind

Press the m or , button while in stop mode to fast wind the tape.

To stop the fast winding tape, press the stop button (H).

DTape counter

Press the CLEAR I or II button to reset the tape counter to 0000. You can use this function for easy relocation of any desired point on the tape.

SYNC REV

BLANK SCAN

REC PARALLEL REC

HIGH DUB

PLAY NORM DUB PLAY

EPitch control (TAPE I deck only)

This control varies the pitch of the music during playback. (This control does not work during recording or dubbing.)

Turning the pitch control knob clockwise increases the playback speed and raises the pitch up to +10%.

Turning the pitch control knob counterclockwise reduces the playback speed and lowers the pitch by a maximum of –10%.

FTo listen through headphones

Plug your headphones into the PHONES jack, and put on the headphones.

Plugging into the PHONES jack does not disable the line outputs.

CAUTION

There is no level control for the headphones output. Beware that sudden loud sounds may occur depending on recorded material. You should avoid prolonged exposure to high volume sound as this can damage your hearing.

12