Recording (either TAPE I or TAPE II)

To stop recording temporarily

Press the PAUSE button to stop recording temporarily. A second press of the button resumes recording.

To Erase Recordings

When you make a recording, the tape is overwritten (previous recording is erased). To erase a tape without making a new recording, set the REC LEVEL control to the minimum () position and press the RECORD button followed by the play button (h or y).

Quick Record Start

Hold down the RECORD button and press the play button (h or y) corresponding to the direction you want the tape to run.

Recording Silence

Use this function to create blanks between songs for proper operation of the Computamatic Program Search (CPS) function.

Press the REC MUTE button when recording reaches the desired point. No signal is recorded for about 4 seconds and then the deck enters the record-pause mode. To resume recording, press the PAUSE button.

ENGLISH

To create a blank of more than 4 seconds long

Hold down the REC MUTE button for the desired length of time. When you release the button, the deck enters the record-pause mode.

To create a blank of less than 4 seconds long

Press the PAUSE button within 3 seconds of pressing the REC MUTE button.

<If you press the REC MUTE button when the deck is in the record-pause mode, no signal is recorded for about 4 seconds, and then the deck shifts back to the record-pause mode.

17