>Specify with the right/left arrow keys, whether you only want to search for freely receivable programmes (Only free) or also for encoded programmes All).

Search run method

Use this line to select between channel search, and frequency search.

>For this purpose, select the search run method line with the up/down arrow keys.

>Use the up/down arrow keys to select the required search run method.

Start channel

>Use the up/down arrow keys to select the Start channel line.

>Use the right/left arrow keys to select the channel, where the search should start.

Stop channel

>Use the up/down arrow keys to select the Stop channel line.

>Use the right/left arrow keys to select the channel, where the search should stop.

9.2.6 Starting the extendedsearch

>In order to start the search run, press the green Start search control key.

The search run can take over 15 minutes.Pay attention to the screen inserts. A messa- ge is displayed on the screen after the search run.

9.2.7 After the search run

After the search run , a message is displayed on the screen with the number of found, new and encoded programmes.

>Acknowledge with OK.

You are now asked, whether you would like to take over the found programmes sorted, unsorted or not at all into the favourites list.

>Use the left/right arrow keys to select the input Sorted, in order to take over the sorted programmes into the favourites list and acknowledge with OK.

The found programmes are sorted into the favourites list according to a pre-programmed list. The order of the programmes is thereby dependent on the transmission area set according to section 11.

>In order to take over unsorted programmes into the favourites list, use the right/left arrow keys to select the input Unsorted and acknowledge with OK.

The unsorted programmes are added to the end of the favourites list.

>Use right/left arrow keys to select the input No and acknowledge with OK, in order to not take over the programmes into the favourites list automatically.

The favourites list can be edited at any time, as described in section 10.

9.3 Manual search /Modification of the programme name

If a programme is not found during the automatic search or during the extended search, it can be necessary to carry out a manual search for this programme.

>Call Station search as described in section 9 and select Manual search.

Source

>Use the up/down arrow keys to select the Source line.

>Use the right/left arrow keys to select, whether you would like to search for an ana- logue programme (FM Radio or Analogue CT) or digital programme (DVB-S, DVB-Cor DVB-T).

EN

55

Page 55
Image 55
TechniSat HD-VISION 40 PVR manual Manual search /Modification of the programme name, Starting the extendedsearch