9.2.3 Extended search for DVB-S programmes
Search mode
> Use the up/down arrow keysto select the Sear ch modeline.
> Specify with the right/left arrow keys, whether you only want to search for freely
receivable programmes (Only free) or also for encoded programmes All).
Satellite
> Use the up/down arrow keysto select the Satellite line.
> Pressing the OK key opens a window with the configured satellites.
> Use the up/down arrow keysto select the satellite, which you would like to scan and
acknowledge with OK.
> Then continue as described in section 9.2.6.
9.2.4 Extended search for DVB-C programmes
Search mode
> Use the up/down arrow keysto select the Sear ch mode line.
> Specify with the right/left arrow keys, whether you only want to search for freely
receivable programmes (Only free) or also for encoded programmes All).
Search run method
Use this line to select between channel search, network search andfrequency
search.
> For this purpose, select the search run method line with the up/down arrow keys.
> Use the up/down arrow keysto select the required search run method.
Start channel
> Use the up/down arrow keysto select the Star t channel line.
> Use the right/left arrow keys to select the channel, where the searchshould start.
Stop channel
> Use the up/down arrow keysto select the Stop channel line.
> Use the right/left arrow keys to select the channel, where the searchshould stop.
New symbol rate
Under this line you can see a set of symbol rates. These symbol rates are considered during a
search run
> Select the New symbol rate line with the up/down arrow keys.
> Now use the numeric keyboardto enter a symbol rate, which should be added to
the list.
This symbol rate is added to the list, if the input is complete.
> Pressing the yellowDelete control key deletes the symbol rate at the last position.
> Then continue as described in section 9.2.6.
9.2.5 Extended search for DVB-T programmes
Search mode
> Use the up/down arrow keysto select the Sear ch mode line.
54
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 54