Replaceable Mechanical Parts
10-2 1705A Spectrum Monitor
Column Descriptions
Items in this sectionare referenced by figure and index numbers to the illustra-
tions.
Indicates part number to be used when ordering replacemen t part from
Tektronix.
Column three (3)indicates the serial number at which the part was first used.
Column four (4) indicates the serialnumber at which the part was removed. No
serial numberentered indicates part is good for all serial numbers.
This indicates thequantity of mechanical parts used.
An item name is separated from the description by a colon (: ). Because of space
limitations, an item name may sometimes appearas incomplete. Use the U.S.
Federal Cataloghandbook H6-1 for further item name identification.
Following is an example ofthe indentation system used to indicate relationship.
12345 Name&Description
Assembly and/or Component
Mounting parts for Assembly and/or Component
*MOUNTING PARTS*/*END MOUNTINGPARTS*
Detail Part of Assembly and/or Component
Mounting parts for Detail Part
*MOUNTING PARTS*/*END MOUNTINGPARTS*
Parts of Detail Part
Mounting parts for Parts of Detail Part
*MOUNTING PARTS*/*END MOUNTINGPARTS*
Mounting Parts always appearin the same indentation as the Item it mounts,
while the detail parts areindented to the right. Indented items are part of and
included with, the next higher indentation. Mountingparts must be purchased
separately, unless otherwise specifi ed.
Indicatesthe code number of the actual manufacturer of the part. (Code to name
and addresscross reference can be found immediately after this page.)
Indicates actual manufacturer’s part number.
Figure & Index No.
(Column 1)
TektronixPart No.
(Column 2)
SerialNo.
(Column 3 and 4)
Qty (Column 5)
Name and Description
(Column 6)
Mfr.Code
(Column 7)
Mfr.Part Number
(Column 8)