17 RS-232 Warning Messages | Teledyne 200AU instruction

T LIST ALL

T CONVTEMP

T LIST NOX T NOX

T LIST

Teledyne API Model 200AU NOX Analyzer Instruction Manual, 02293, Rev. F

The T command lists TEST messages. Examples of the T command are:

Lists all active test messages

Lists all test messages

Prints the temperature of the moly converter

Prints NOx concentration message

5.5.4 WARNING Commands and Messages

Table 5-17: RS-232 Warning Messages

Name	Message	Description
WSYSRES	SYSTEM RESET	Analyzer was reset/powered on

WRAMINIT	RAM INITIALIZED	RAM was erased

WSAMPFLOW	SAMPLE FLOW WARN	Sample flow out of spec.

WOZONEFLOW	OZONE FLOW WARNING	Ozone flow out of spec.

WRCELLPRESS	RCELL PRESS WARN	Rx cell pressure out of spec.

WBOXTEMP	BOX TEMP WARNING	Box temp. out of spec.

WRCELLTEMP	RCELL TEMP WARNING	Reaction cell temp. out of spec.

WCONVTEMP	MOLY TEMP WARNING	Molycon temp. out of spec.

WPMTTEMP	PMT TEMP WARNING	Molycon temp. out of spec.

WPREREACT	PRACT WARN XXX.X MV	Pre-reactor filter receive a reading out
		of limit spec.

WHVPS	HVPS WARNING	High voltage out of spec.

WDCPS	DCPS WARNING	DC Voltage out of spec.

WOZONEGEN	OZONE GEN OFF	Ozone Generator is off

WDYNZERO	CANNOT DYN ZERO	Dynamic zero cal. out of spec.

WDYNSPAN	CANNOT DYN SPAN	Dynamic span cal. out of spec.

WVFDET	V/F NOT DETECTED	V/F board not installed or broken

5-33

200AU specifications

The Teledyne 200AU is a cutting-edge analytical instrument designed primarily for trace and ultra-trace analysis of elements in various liquid samples. Renowned for its reliability and precision, this inductively coupled plasma mass spectrometer (ICP-MS) is widely utilized in environmental monitoring, food safety, clinical diagnostics, and geochemical research.

One of the distinguishing features of the Teledyne 200AU is its exceptional sensitivity, allowing for the detection of elements at concentrations as low as parts per trillion (ppt). This sensitivity is crucial for applications where even minute traces of contaminants can have significant implications. The instrument also boasts a wide dynamic range, accommodating high-concentration samples without compromising accuracy.

The Teledyne 200AU incorporates advanced technologies that enhance its analytical capabilities. At the core of its design is a robust ICP source, which ensures optimal ionization efficiency. The instrument also features a high-resolution quadrupole mass analyzer, which enables precise separation and identification of ions based on their mass-to-charge ratio. This feature is essential for distinguishing between isotopes and analyzing complex mixtures.

Another notable characteristic of the Teledyne 200AU is its user-friendly interface, which simplifies the operation and data management processes. The software is intuitive, offering sophisticated data processing algorithms that streamline analysis. Users can easily access real-time data visualization, facilitating timely decision-making based on analytical results.

The instrument is built with durability in mind, featuring a compact design that allows for easy integration into various laboratory environments. The Teledyne 200AU is also equipped with state-of-the-art safety features, including enhanced cooling systems and automated shutdown protocols to protect both the instrument and the user.

Moreover, the Teledyne 200AU supports a variety of sample introduction methods, including nebulization and laser ablation, providing flexibility to accommodate different types of samples and experimental needs. Its multi-element capability further enhances its versatility, allowing simultaneous detection of multiple elements in a single analysis.

In summary, the Teledyne 200AU stands out as a premier instrument in the field of mass spectrometry. Its combination of high sensitivity, advanced technology, user-friendly features, and robust design makes it an invaluable tool for scientists and researchers seeking precise elemental analysis across various disciplines.

Teledyne 200AU instruction manual 17 RS-232 Warning Messages

Models: 200AU

Table 5-17: RS-232 Warning Messages

Name

200AU specifications