Teledyne API Model 200AU NOX Analyzer Instruction Manual, 02293, Rev. F

5.2Sample Mode

5.2.1Test Functions

NOTE

In any of the following TEST functions, if a value of

XXXXis displayed, that indicates an off scale and therefore meaningless reading.

To use the TEST functions to diagnose instrument faults, refer to Troubleshooting Section 9.1.

Range

This is the range of the instrument. Electronically, there is only one physical range. The range of the instrument is just the software expanding various portions of the single physical range to fill the selected analog output voltage range. In standard configuration there is one range for all 3 outputs.

Independent range option allows different ranges for each output. When enabled, there will be three range values displayed, NO, NOx and NO2.

Auto range mode allows a low range and high range. The M200AU will automatically switch to the other range dynamically as concentration values require. The TEST values will show the range the instrument is currently operating in, and will dynamically display the alternate range as the range changes occur.

NOTE

Each of the range modes Single range, Auto range, and

Independent ranges are mutually exclusive.

Stability

The instrument noise is computed using the standard deviation of the last 10 minutes of data, with the value being computed at the end of each NO/NOx cycle. It is computed for the NOx channel only. The stability value only becomes meaningful if sampling a constant concentration for more than 10 minutes. The value should be compared to the value observed in the factory check-out.

The Stability reading on the front panel TEST functions is different than the STABIL reading found in the DAS. Check the DAS in Section 5.3.3 for more information on the STABIL - DAS.

5-10

Page 47 Page 49
Page 48
Image 48
Teledyne 200AU instruction manual Sample Mode, Test Functions, Range
Page 47 Page 49

200AU specifications

The Teledyne 200AU is a cutting-edge analytical instrument designed primarily for trace and ultra-trace analysis of elements in various liquid samples. Renowned for its reliability and precision, this inductively coupled plasma mass spectrometer (ICP-MS) is widely utilized in environmental monitoring, food safety, clinical diagnostics, and geochemical research.

One of the distinguishing features of the Teledyne 200AU is its exceptional sensitivity, allowing for the detection of elements at concentrations as low as parts per trillion (ppt). This sensitivity is crucial for applications where even minute traces of contaminants can have significant implications. The instrument also boasts a wide dynamic range, accommodating high-concentration samples without compromising accuracy.

The Teledyne 200AU incorporates advanced technologies that enhance its analytical capabilities. At the core of its design is a robust ICP source, which ensures optimal ionization efficiency. The instrument also features a high-resolution quadrupole mass analyzer, which enables precise separation and identification of ions based on their mass-to-charge ratio. This feature is essential for distinguishing between isotopes and analyzing complex mixtures.

Another notable characteristic of the Teledyne 200AU is its user-friendly interface, which simplifies the operation and data management processes. The software is intuitive, offering sophisticated data processing algorithms that streamline analysis. Users can easily access real-time data visualization, facilitating timely decision-making based on analytical results.

The instrument is built with durability in mind, featuring a compact design that allows for easy integration into various laboratory environments. The Teledyne 200AU is also equipped with state-of-the-art safety features, including enhanced cooling systems and automated shutdown protocols to protect both the instrument and the user.

Moreover, the Teledyne 200AU supports a variety of sample introduction methods, including nebulization and laser ablation, providing flexibility to accommodate different types of samples and experimental needs. Its multi-element capability further enhances its versatility, allowing simultaneous detection of multiple elements in a single analysis.

In summary, the Teledyne 200AU stands out as a premier instrument in the field of mass spectrometry. Its combination of high sensitivity, advanced technology, user-friendly features, and robust design makes it an invaluable tool for scientists and researchers seeking precise elemental analysis across various disciplines.
Top Page Image Contents