Teledyne API Model 200AU NOX Analyzer Instruction Manual, 02293, Rev. F

2 GETTING STARTED

2.1Unpacking

1.Verify that there is no apparent shipping damage. If damage has occurred please advise shipper first, then Teledyne API.

CAUTION

To avoid personal injury, always use two persons to

lift and carry the Model 200AU.

2.Before operation, it is necessary to remove the shipping hold-down screws. Remove the instrument cover, then refer to Figure 2-1 for screw location.

3.Also check for internal shipping damage, and generally inspect the interior of the instrument to make sure all circuit boards and other components are in good shape.

4.Please check the voltage and frequency label on the rear panel of the instrument for compatibility with the local power before plugging in the M200AU.

2.2Electrical and Pneumatic Connections

Refer to Figure 2-2 to locate the rear panel electrical and pneumatic connections.

1.Attach the pump to the Exhaust Out port on the instrument rear panel.

2.If you are connecting to a calibrator, attach a vented sample inlet line to the sample inlet port. The pressure of the sample gas at the inlet port should be at ambient pressure. The exhaust from the pump should be vented to atmospheric pressure. See Figure 2-3 for inlet and exhaust line venting recommendations during calibration.

3.If desired, attach the analog output connections to a strip chart recorder and/or datalogger. Refer to Figure 9-4 for the jumper settings for the desired analog output voltage range. Factory default setting is 0-5VDC.

4.Connect the power cord to the correct voltage line, then turn to Section 2.3 Initial Operation.

2-1

Page 13
Image 13
Teledyne 200AU instruction manual Getting Started, Unpacking, Electrical and Pneumatic Connections

200AU specifications

The Teledyne 200AU is a cutting-edge analytical instrument designed primarily for trace and ultra-trace analysis of elements in various liquid samples. Renowned for its reliability and precision, this inductively coupled plasma mass spectrometer (ICP-MS) is widely utilized in environmental monitoring, food safety, clinical diagnostics, and geochemical research.

One of the distinguishing features of the Teledyne 200AU is its exceptional sensitivity, allowing for the detection of elements at concentrations as low as parts per trillion (ppt). This sensitivity is crucial for applications where even minute traces of contaminants can have significant implications. The instrument also boasts a wide dynamic range, accommodating high-concentration samples without compromising accuracy.

The Teledyne 200AU incorporates advanced technologies that enhance its analytical capabilities. At the core of its design is a robust ICP source, which ensures optimal ionization efficiency. The instrument also features a high-resolution quadrupole mass analyzer, which enables precise separation and identification of ions based on their mass-to-charge ratio. This feature is essential for distinguishing between isotopes and analyzing complex mixtures.

Another notable characteristic of the Teledyne 200AU is its user-friendly interface, which simplifies the operation and data management processes. The software is intuitive, offering sophisticated data processing algorithms that streamline analysis. Users can easily access real-time data visualization, facilitating timely decision-making based on analytical results.

The instrument is built with durability in mind, featuring a compact design that allows for easy integration into various laboratory environments. The Teledyne 200AU is also equipped with state-of-the-art safety features, including enhanced cooling systems and automated shutdown protocols to protect both the instrument and the user.

Moreover, the Teledyne 200AU supports a variety of sample introduction methods, including nebulization and laser ablation, providing flexibility to accommodate different types of samples and experimental needs. Its multi-element capability further enhances its versatility, allowing simultaneous detection of multiple elements in a single analysis.

In summary, the Teledyne 200AU stands out as a premier instrument in the field of mass spectrometry. Its combination of high sensitivity, advanced technology, user-friendly features, and robust design makes it an invaluable tool for scientists and researchers seeking precise elemental analysis across various disciplines.