SECTION ONE: GENERAL SAFETY INSTRUCTIONS
Safety Precautions
GAS AND ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS
PLEASE READ CAREFULLY
30" Gas Model:
120 volts, 60 Hz.,
15 Amp electrical circuit required.
36" Gas Models:
120 volts, 60 Hz.,
CAUTION
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE CONNECTED TO A PROPERLY GROUNDED AND POLARIZED ELECTRICAL POWER SUPPLY.
CAUTION
Accessible parts may become hot when the grill is in use. Young children must be kept away.
15 Amp electrical circuit required. 36" model with electric griddle - 20 Amp circuit required.
48" Gas Models:
120 volts, 60 Hz.,
15 Amp electrical circuit required. 48" models with electric griddle - 20 Amp circuit required.
See Installation Instructions for electrical requirements and grounding instructions.
It is the personal responsibility and obligation of you, the user, to have this appliance connected to the electrical power supply in accordance with the National Electrical Code and/or applicable local codes and ordinances by a qualified electrician.
WARNING
ALWAYS DISCONNECT THE ELECTRICAL PLUG FROM THE WALL RECEPTACLE BEFORE SERVICING THIS UNIT.
It is recommended that a dedicated circuit servicing this appliance be provided.
The use of gas cooking appliances results in the production of heat and moisture.
CAUTION - ALL MODELS
IN CASE OF AN ELECTRICAL FAILURE
If for any reason a gas control knob is turned ON and there is no electrical power to operate the electronic igniters on the range's cooktop burners, turn OFF the gas control knob and wait 5 minutes for the gas to dissipate before lighting the burner manually.
To light the burners manually, carefully hold a lighted match to the burner ports and turn the gas control knob to HI. During a power failure you can use the standard cooktop burners, but each must be lit with a match.
DO NOT attempt to light the two left burners manually. These burners are equipped with the ExtraLow® feature and cannot be lit manually.
TESTED IN ACCORDANCE WITH: | Check your local building codes for | ||
• ANSI Z21.1 for Household Gas | the proper method of installation. | ||
In the absence of local codes, this | |||
| Appliances | ||
| unit should be installed in | ||
• | UL858 for Household Electric | ||
accordance with the National Fuel | |||
| Ranges | Gas Code No. Z223.1 current issue | |
• | and the National Electrical Code | ||
ANSI/NFPA No. 70 current issue | |||
| Household Cooking Ranges | ||
| or the Can - B149 Installation Codes | ||
• | CAN/CGA | ||
for Gas Burning Appliances and | |||
| Gas Ranges | ||
| C22.1 Canadian Electrical Code | ||
Part 1.
SAVE THESE INSTRUCTIONS
2
