SECTION SIX: CARE AND MAINTENANCE

Do-It-Yourself Maintenance

OVEN LIGHT BULB REPLACEMENT

Replace only with a 10-watt, halogen appliance light bulb. DO NOT USE a standard household light bulb in any oven or any bulb over 10 watts.

TO REPLACE THE LIGHT BULB:

1.Turn oven light switch to the off position. Let bulb and cover cool completely.

2.Remove the light cover.

3.Remove the burned-out bulb. Replace it with a 10-watt halogen appliance light bulb only. Don't touch bulb with fingers. Follow bulb manufacturer's instructions.

4.Replace cover. Turn circuit back on, if need be. (See Caution.)

CAUTION:

Before replacing the light bulb, be certain the Oven Light Switch is in the off posi- tion. Let bulb and cover cool completely before touching. If the light bulb glass comes loose from the base, turn the power to the oven OFF at the circuit breaker panel, before attempting to remove the bulb base from the socket.

POWER FAILURE

In the event of a power failure, only the standard burners can be lighted manually. It is necessary to light each standard burner individually.

If the range's cooktop is being used when the power failure occurs, turn all of the burner control knobs to the OFF position. Then, the standard burners can be lighted by holding a match at the ports and turning the control knob to the HI position. Wait until the flame is burning all the way around the burner cap before

adjusting the flame to the desired height.

The two ExtraLow® burners on the far left side cannot be used during a power failure. Be sure to turn them OFF if a power failure occurs because they will not turn back on until both control knobs are turned OFF and then turned back on again. See “What to do if you Smell Gas”, inside front cover.

If you have low gas pressure, contact your gas company.

INTERMITTENT OR CONSTANT IGNITER SPARKING

Intermittent or constant sparking of the sealed gas surface burners can result from a number of preventable conditions. Eliminate these conditions as indicated in the chart.

SYMPTOM

CAUSE

Intermittent sparking

•

Ceramic igniter is wet or dirty.

 

•

Burner ports are clogged.

REMEDY

•Carefully dry or clean igniter.

•Clean ports on burner cap with a wire, a needle or straightened paper clip.

More than four clicks of

•

Improper fit of burner cap onto

igniter before lighting

 

burner base.

Constant Sparking

•

Range is not properly grounded.

•Align burner cap properly on burner base.

•Refer to Installation Instructions. Have a qualified electrician ground the range properly.

• Electrical power supply is

• Refer to Installation Instructions.

incorrectly polarized.

Have a qualified electrician

 

ground the range properly.

38

Page 39 Page 41
Page 40
Image 40
Thermador PG30 manuel dutilisation Do-It-Yourself Maintenance, Oven Light Bulb Replacement, To Replace the Light Bulb
Page 39 Page 41

PG30 specifications

The Thermador PG30 is a versatile and high-performance gas cooktop that combines luxury and functionality, making it a preferred choice for both professional chefs and home cooks. Designed with precision and quality, the PG30 stands out in the crowded kitchen appliance market.

One of the most appealing features of the Thermador PG30 is its powerful burners. The cooktop is equipped with four different burners, each designed to deliver consistent and robust heat. Among them, a star-rated burner can reach up to 18,000 BTUs, allowing for quick boiling and high-temperature cooking. This high-performance capability is perfect for searing meats or achieving the perfect stir-fry.

Another key technology integrated into the PG30 is the patented Star® Burner design. This innovative feature promotes even heat distribution across the bottom of cookware, eliminating hotspots and ensuring that your dishes are cooked to perfection. Additionally, the burners are designed for easy flame adjustment, allowing for precise control over heat levels during cooking.

The PG30 also features a sleek stainless-steel surface, which not only enhances its aesthetic appeal but also makes it easier to clean. The surface is resistant to scratches and stains, maintaining its sophisticated appearance over time. Cooktop grates made from cast iron provide durability and support for heavy pots and pans while adding a professional touch to your kitchen.

Safety is paramount in the design of the Thermador PG30. The cooktop is equipped with a variety of safety features, including automatic re-ignition. This technology ensures that if a flame is accidentally extinguished, the burner will automatically reignite, preventing the buildup of gas. The cooktop also includes a child lock feature, which adds an extra layer of safety in homes with young children.

Lastly, the Thermador PG30 is compatible with various types of cookware, making it an excellent choice for culinary enthusiasts who prefer diverse cooking methods. Whether you use cast iron skillets, stainless-steel pots, or non-stick pans, the PG30 delivers exceptional performance with every use.

In summary, the Thermador PG30 gas cooktop combines advanced cooking technology, safety features, and stunning design to provide a top-tier cooking experience. It is an excellent addition to any modern kitchen, appealing to those who value quality, efficiency, and style in their culinary appliances.
Top Page Image Contents