Toshiba 3510C manual Save as File

8 JOB STATUS

Error code	Problem	What to do
2C80	Failed to process	Ask your administrator to confirm whether the Received Internet
	received E-mail job	Fax Forward is set.
2C81	Failed to process	Ask your administrator to confirm whether the Received Fax
	received Fax job	Forward is set.
2CC0	Job canceled	Job was canceled.
2CC1	Power failure occurred	Make sure that the power cable is connected properly and it is
		inserted securely. Resend the job.
Save as File
2D10, 2D12,	Illegal job status	Turn the power OFF and then back ON.
2D13, 2D20-		Retry sending. If the error still occurs, contact your service rep-
2D22		resentative.
2D11	Not enough memory	Wait for a while and retry the job. If the error still occurs, turn the
	for saving the scan job	power OFF and then back ON and retry it.
2D14	An internal error	Turn the power OFF and then back ON, and retry the job. If the
	occurred	error still occurs, contact your service representative.
2D15	Exceeding maximum	Divide the file into several files, or retry in a single-page format.
	file capacity
2D30	Failed to create direc-	Make sure that the access privilege to the storage directory is
	tory	writable and also the USB device in the directory have enough
		space. Then retry the job. If more than one job is performed
		simultaneously, an error may occur because the disk temporarily
		runs out of space. In this case, wait for a while and retry the job.
		If an error still occurs, turn the power OFF and then back ON,
		and then retry it.
2D31, 2D33	Failed to create file	Make sure that the access privilege to the storage directory is
		writable and also the USB device in the directory have enough
		space. Then retry the job. If more than one job is performed
		simultaneously, an error may occur because the disk temporarily
		runs out of space. In this case, wait for a while and retry the job.
		If an error still occurs, turn the power OFF and then back ON,
		and then retry it.
2D32	Failed to delete file	Make sure that the access privilege to the storage directory is
		writable and then perform it again. If the error still occurs, turn
		the power OFF and then back ON, and then carry it out again.
2D40	Failed to convert	When this error occurs at the slim PDF setting, retry the scan. If
	image file format	the error still occurs, retry it with the normal PDF setting.
		When this error occurs other than at the slim PDF setting, turn
		the power OFF and then back ON. Retry the scan. If the error
		still occurs, contact your service representative.
2D60	Failed to copy file	Turn the power OFF and then back ON. Retry the scan. If the
		error still occurs, contact your service representative.
2D66	Failed to process your	Delete the data in the local storage folder in the equipment and
	job. Insufficient stor-	retry the scan.
	age space.
2DC0	Job canceled.	Job was canceled.
2DC1	Power failure	Make sure that the power cable is connected properly and it is
	occurred.	inserted securely. Resend the job.
Store to e-Filing
2B10	There was no applica-	Turn the power OFF and then back ON. Retry the scan. If the
	ble job.	error still occurs, contact your service representative.
2B11	Job status failed.	Turn the power OFF and then back ON. Retry the scan. If the
		error still occurs, contact your service representative.
2B20	Failed to access file	Turn the power OFF and then back ON. Retry the scan. If the
		error still occurs, contact your service representative.
2B21	Message size	Fragment the message into several smaller-sized ones and
	exceeded limit or	send them again.
	maximum size
2B30	Insufficient disk space	Delete unnecessary documents in e-Filing and try again.

288 Error Code