Toshiba 3510C manual Place paper in the drawers

7 Place paper in the drawer(s).

yPlace paper with its copy side up. (The copy side may be described on the wrapping paper.)

y For the maximum number of sheets that can be set, see P.51 “Acceptable copy paper”.

yFan the paper well before placing it in the drawer.

yBe sure that the paper height does not exceed the line indicated inside of the guide.

yDo not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of 0.02" (0.04" or less in total) is left between the paper and the side guide for plain paper, and approx. 0.02" to 0.04" (approx. 0.04" to 0.08" in total) for thick paper. If the gap is insufficient, it could cause paper mis- feeding.

A

Preparation 2- Setting Copy Paper 55