Toshiba 3510C manual Place the originals

2 Place the original(s).

See the following pages to set the originals.

P.64 “Acceptable originals”

P.66 “Placing originals on the glass”

The originals are copied in the order of being scanned.

3 Select the copy modes as required. When you want to copy more than one set, key in the desired number of copies.

yPress the [CLEAR] button on the control panel to correct the number keyed in.

y Note that some combinations of copy modes are restricted. ( P.382 “Copying Func-

tion Combination Matrix”, P.384 “Image Quality Adjustment Combination Matrix”)

yOnce the [START] button on the control panel is pressed, any change in copy modes (including setting of the previously divided sets of originals) cannot be applied after- ward.

4 Press the [START] button. Copying starts.

When you copy by placing originals on the original glass (e.g. using the sort mode, or making 1-sided original 2-sided copies), the data of these originals are scanned into the memory. In this case, proceed to steps 5 and 6.

Making Copies 75