Toshiba 3510C Bypass copying on non-standard size paper, Place the original on the original glass

2 HOW TO MAKE COPIES

Bypass copying on non-standard size paper

Non-standard size paper should be within the following ranges: A (Length): 3.9" to 11.7", B

(Width): 5.8" to 17"

B A

1 Place some sheets of paper with their copy side down on the bypass tray. Align the side guides to the paper length while holding A.

The message “Ready for bypass feeding” appears.

A

B

yRear side of the side guides of the bypass tray has an indicator for paper height. The height of the sheets must not exceed this indicator.

yWhen you use more than one sheet, fan the sheets well before setting them on the tray.

yDo not push the sheets into the entrance of the bypass feeder; it may cause a paper jam.

yWhen the paper size is larger, draw out the three-stage paper holder. Raise B when you use LD or a larger size of paper.

2 Place the original on the original glass.

88 Bypass Copying