Toshiba 3510C manual Placing an original on the original glass, Press the Start button

2 HOW TO MAKE COPIES

3 Select the copy modes as required. When you want to copy more than one set, key in the desired number of copies.

yPress the [CLEAR] button on the control panel to correct the number keyed in.

y Note that some combinations of copy modes are restricted. ( P.382 “Copying Func-

tion Combination Matrix”, P.384 “Image Quality Adjustment Combination Matrix”)

yOnce the [START] button on the control panel is pressed, any change in copy modes (including setting of the previously divided sets of originals) cannot be applied after- ward.

4 Press the [START] button.

y Copying starts. The paper exits with its copied side down.

yWhen the drawer runs out of paper

during copying, the corresponding drawer on the touch panel and the [JOB STATUS] button on the control panel blink. Add paper to this drawer or select another one with the same paper size.

yBe careful because the paper exit area and paper just after exiting are hot.

Placing an original on the original glass

1	Place paper in the drawer(s).
	For the types and sizes of paper selectable, see			P.51 “Acceptable copy paper”.
	When the desired size or type of paper is not in any of the drawers or the Large Capacity
	Feeder, see the following pages.
		P.53	“Setting copy paper (size change)”
		P.62	“Placing paper in the Large Capacity Feeder (optional)”
		P.81	“Bypass Copying”

74 Making Copies