Toshiba 3510C manual Close the front cover of the finisher

8 Install the staple cartridge. When installing a staple cartridge, push it downward until it is fixed with a click sound.

9	Pull the handle of the stapler of
	the Saddle Stitch Unit toward

you to unlock it. Then return the stapler to its original posi- tion.

10 Insert the Saddle Stitch Unit into the finisher carefully.

2

1

11 Check the following 2 items before test stapling. y Check if the finisher is securely installed on the equipment. y Check if any of LD or LT-R paper is set in the drawer.

12 Close the front cover of the finisher.

Test stapling is automatically performed.

Test stapling will not be performed if the conditions mentioned in step 11 are not met. Be sure to check the items mentioned in step 11 and open the front cover of the finisher and then close it again before performing test stapling. Test stapling is necessary to prevent void stapling.

“Examine stapler in the Saddle Stitch Unit” 349