Toshiba 3510C manual Press the Start button

5 USING THE EDITING FUNCTIONS

6 Enter the values read in step 5 for the specified area, and then press the [SET] button. Set 4 values in order.

yAfter the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an original.

yTo correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted field move one position upward. Highlight the field in which you want to rectify the value, and then key in the correct one.

7 Press the [ENTER] button after specifying the area.

8 Place the original(s) with its face down.

y Set the original with its face down and bottom toward you and fit its top left corner against that of the original glass.

ySelect other copy modes as

required.

9 Press the [START] button.

176 EDITING