Toshiba 3510C manual To cancel the energy saving mode

1 BEFORE USING EQUIPMENT

These modes are automatically cleared upon the reception of print data, Fax data, Internet Fax data or E-mails. They are also cleared by pressing the [START] button.

*1 This period is set at 15 minutes by factory default.

*2 This period is set at 60 minutes for the e-STUDIO2500c/3500c and 90 minutes for the e-STUDIO3510c by factory default.

See the User Functions Guide to change the default settings noted above.

The equipment can also be made to enter the sleep mode manually by means of the following procedure.

1 Press the [ENERGY SAVER/ SHUTDOWN] button on the control panel.

2 Press the [SLEEP] button on the touch panel.

The equipment enters into the sleep mode. During this mode, the display on the touch panel disappears and the [ENERGY SAVER/SHUTDOWN] button lights in green.

To cancel the energy saving mode

Press the [START] button on the control panel. The sleep mode is cleared and the equipment will be ready for copying.

The sleep mode is also cleared by pressing any button of [ENERGY SAVER / SHUTDOWN], [COPY], [SCAN], [FAX] and [e-FILING].

50 Preparation 1- Turning Power On/Off