Toshiba 3510C manual Bypass copying on standard size paper step

5	Press the [MEDIA TYPE] button on the touch panel if the media type
	of the paper you have set on the tray is other than plain paper.

6 Press the button of the same media type as the one of the paper you have set on the tray, and then press the [ENTER] button on the touch panel.

E.g.: When Thick paper 1 is set

Set other copy modes as required.

yIf a media type which is not same as the one you have set is selected here, this may cause a paper jam or significant image trouble.

yIf the paper size is not specified here, some operations such as cleaning may slow down the copying.

The paper type which has been set can be confirmed with the touch panel. See the table

in P.82 “Bypass copying on standard size paper” step 5.

7 Press the [START] button on the control panel.

When you copy on OHP films, remove the copied OHP films, which have exited on to the receiving tray one by one. When the films pile up, they may become curled and may not be projected properly.

Bypass Copying 87