„ Retrieval of printer configuration failed | Toshiba 255, 355, 455

3 TROUBLESHOOTING FOR PRINTING

Retrieval of printer configuration failed

Problem Description

When accessing the printer properties, the message “Retrieval of printer configuration failed” is displayed.

Corrective Action

The printer driver cannot communicate with the equipment. Try the steps in the checklist below.

No	Check...	Yes	No	Corrective Action

1	Is the equipment turned on?	Next Step	Ö	Turn on the equipment.
		Ø	Ö
		Ø

2	Can you connect the computer to the equipment	Next Step	Ö	Restart the equipment.
	via TopAccess?	Ø	Ö
	via TopAccess?	Ø

3	Does the same message appear again when you	Ö	End	Check the printer driver port assignment and
	access the property of the printer driver?	Ö	End	make sure that it is correct.
	access the property of the printer driver?			make sure that it is correct.

Cannot print a job as expected using PS3 printer driver

Problem Description

When printing with the PS3 printer driver from the application that creates the PostScript code for printing such as Adobe Acrobat, the following print options may not work correctly:

yManual Scale

yPrint Paper Size

yPaper Type

yUse Front Cover

yUse Back Cover

yInsert Pages

yInterleave Pages

yBooklet

yMultiple Pages per Sheet

yAll options from the [Effect] tab

yAll options from the [Image Quality] tab

Corrective Action

Disable [Use PostScript Passthrough] in the [PostScript Settings] dialog box and print the document.

Cannot change settings on the [Fonts] tab and the [Configuration] tab

Problem Description

The [Fonts] tab and [Configuration] tab are grayed out and their settings cannot be changed.

Corrective Action

Users who do not have the privilege to change the printer driver setting cannot change the options in the [Fonts] tab and [Configuration] tab. Please log on with the Administrator or a Power User.

Printer Driver Problems 81

Image 83

Toshiba 255, 355 „ Retrieval of printer configuration failed, „ Cannot print a job as expected using PS3 printer driver

Contents

Troubleshooting Guide Page ‰ Trademarks „ How to read this manual ‰ Symbols in this manualPreface ‰ ScreensPage Contents Troubleshooting for Scanning Checking the Equipment Status with TopAccess Contents Clearing a Staple Jam Cleaning the Charger Cleaning the Hole Punch Dust BinRemoval and Installation of the Exit Support Tray Clearing a Paper Jam Messages Displayed on the Touch Panel Message Problem Description Corrective Action Change Drawer to Correct Limits Scanned has exceeded the limit „ Locating a paper jam Clearing a Paper Jam After clearing the jam, close all the opened covers „ Clearing a paper jam‰ Tips on removing the jammed paper Clear the paper jam ‰ If paper jams occur frequently Lower the original feeder tray Close the upper cover Under the tray Clearing a Paper Jam Open the Large Capacity paper feed cover „ Paper jam in the drawer feeding portion„ Paper jam in the Large Capacity Feeder optional Close the cover of the drawer feeding portion Remove the jammed paper Close the paper feed cover „ Paper jam in the Paper Feed Pedestal optional„ Paper jam in the bypass tray „ Paper jam in the automatic duplexing unit Open the automatic duplexing unit Remove the jammed paper „ Paper jam on the paper transport pathUnit.Remove the jammed paper while lifting up the transfer Do not touch the fuser unit or the metal portion around it „ Paper jam in the fuser unit Remove paper that sticks out from the exit tray side Clearing a Paper Jam Raise the lever and open the upper receiving tray „ Paper jam in the Bridge Kit optionalClose the Bridge Kit cover Open the Hole Punch Unit cover Remove the jammed paper Open the Bridge Kit cover Holdingfinisher. the lever, open the upper receiving tray Remove the jammed paper When the Hole Punch Unit MJ-6101 is installed Lift up the Hole Punch Unit and remove the jammed paper Clearing a Paper Jam Clearing a Paper Jam Saddle stitch unit Turn the left knob clockwise while pressing it „ Paper jam in the Saddle Stitch Finisher MJ-1025 optional Separate the finisher from the equipment Close the front cover of the finisher Separate the finisher from the equipment Turn the green knob on the lower right side clockwise „ Paper jam in the Hanging Finisher MJ-1031 optional ‰ Jam when making copies or prints using a drawer „ Clearing paper jams caused by a wrong paper size setting Remove the jammed paper ‰ Jam when making copies or prints using the bypass tray Drawer button on the touch panel ‰ Jam when printing from the FAXTurn off the main power switch Clearing a Paper Jam Remove the jammed staples Clearing a Staple Jam„ Staple jam in a finisher ‰ Finisher MJ-1101 ‰ Saddle Stitch Finisher MJ-1024 Lower the guide while holding the knob. a Stapling area Raise the guide while holding the knob ‰ Saddle Stitch Finisher MJ-1025On both sides Clearing a Staple Jam ‰ Hanging Finisher MJ-1031 Clearing a Staple Jam „ Staple jam in the saddle stitch unit Fit the staple cartridges Clearing a Staple Jam Replacing a Toner Cartridge Recommended toner cartridges Open the front cover Hold down the green lever Pull out the toner cartridge Close the front cover Clean the charger Press JOB Status Press the Toner tab „ Replacing a Near Empty toner cartridge See Fit a new staple case on the staple cartridge Refilling With Staples„ Refilling finisher staples ‰ Finisher MJ-1101 ‰ Saddle Stitch Finisher MJ-1024 Close the front cover of the finisher ‰ Saddle Stitch Finisher MJ-1025 Return the stapler unit to the finisher Staple case ‰ Hanging Finisher MJ-1031 Staple case „ Refilling saddle stitch unit staples Fit the new cartridges Remove the empty staple cartridges Close the front cover of the finisher Open the front cover Clean the charger Cleaning the Charger Pull the hole punch dust box out of the Hole Punch Unit Cleaning the Hole Punch Dust Bin„ Hole Punch Unit MJ-6101 / MJ-6004 „ Hole Punch Unit MJ-6005 Cleaning the Hole Punch Dust Bin Removal and Installation of the Exit Support Tray Copying Problems Troubleshooting for Copying Problem Description Cause Corrective Action Copying Problems Copying Problems Page Client Problems Print Job ProblemsPrinter Driver Problems Network Connection Problems „ Clearing print job errors Print Job Problems Problem Description „ Command line options not processed Printer Driver Problems„ Cannot print port setting problems „ Cannot print Snmp Community Name problems „ Cannot print a job as expected using PS3 printer driver „ Retrieval of printer configuration failed „ Cannot print properly with AppleTalk print Network Connection Problems„ Cannot print with SMB print „ Checking the client status Client Problems „ Print jobs not output Hardware Problems„ Startup page not printed Scanning Problems Troubleshooting for Scanning „ Cannot find the data saved in the shared folder Scanning Problems„ Cannot E-mail my scans Filing Web Utility Problems Troubleshooting for e-Filing „ Numerous sub windows repeatedly appear Filing Web Utility Problems„ e-Filing Web Utility terminates the session Message Corrective Action „ Error messages Filing Web Utility Problems Locating the Equipment in the Network Ldap Search and Authentication ProblemsPrinting Problems Network Related Network Fax N/W-Fax Driver Problems „ Cannot locate the equipment in the network Locating the Equipment in the Network „ Cannot locate the equipment with Local Discovery Check the network settings following the checklist below „ Equipment does not respond to ping command „ Ldap authentication takes a long time Ldap Search and Authentication Problems Printing Problems Network Related „ Novell print in a NetWare environment „ IPP print in a Windows operating system environment „ UNIX/Linux environment „ Macintosh environment ‰ Client software CD now required Network Fax N/W-Fax Driver Problems„ N/W-Fax Driver Installation Error Messages ‰ Setup needs to copy Windows NT files ‰ This port is currently in use ‰ Problem with the current printer setup‰ Location does not contain information about your hardware ‰ Fax transmission cannot be performed with a cover sheet Page 104 Error Messages 106 Error Codes 110 Printer Error Hardware Status Icons on TopAccess Device Tab Paper Empty TopAccess Message Corrective Action Error Messages Documents in the Scan folder have been deleted by a user MFP Error Messages „ Error codes on print jobs Error Codes A2A1 „ Error codes on transmission and reception Device name 3D20 „ Error codes on scan jobs Save as File Store to e-Filing Perform the print with the administrator’s password. If Regular Maintenance 122 When You Think Something Is Wrong With the Equipment 120 „ General operations When You Think Something Is Wrong With the Equipment Guide „ Originals and paper Scanning area surface of the long rectangular glass Regular Maintenance Index Toner cartridge replacing User information DP-2090/2520/3000/3570/4570 OME080178B0 Multifunctional Digital Systems