Toshiba B-850 owner manual Sensor Select

3. PRINTER OPERATION EO1-33029

3.4 Using the B-852 Printer Properties Menus

3.4.8 Stock Tab (Cont.)

NOTE:

In Issue Mode, Normal print- ing is done in Batch Mode (with back feed).

Sensor Select

∙None. Used to specify that either continuous forms (labels without gaps) are being used or that, if there are gaps or marks, they should be ignored.

∙Reflective. The reflective sensor is used to detect the marks on continuous stock that has black marks on the back.

∙Transmissive. The transmissive sensor is used to locate the gaps between labels.

∙Transmissive (Preprinted Labels). This sets the transmissive sensor's threshold setting to work better with pre-printed label stock.

∙Reflective (Manual Threshold). This allows setting the reflective sensor's threshold on the printer itself. See the printer's documentation for information on how to set this threshold.

Label Gap - This is the box for typing in the length of the gap between

labels. This setting may be set between 2.0 and 20.0 millimeters.

Issue Mode – When the arrow on this scrolling text box is clicked on, only one option will be available and that is batch mode with back feed since this model printer does not use the strip module.

Cut Mode – When the arrow on the Cut: scrolling text box is clicked on, the following display appears.

3-26