4. ON LINE MODE
4. ON LINE MODE
4.1 Operation Panel
4.1 Operation Panel
This chapter describes usage and purpose of the keys on the Operation Panel in On Line Mode.
When the printer is in On Line Mode and connected to a host computer, normal operation of printing images on labels or tags can be accomplished.
∙The figure below illustrates the Operation Panel and key functions.
LCD Message Display
POWER LED (Green)
[RESTART] key
[FEED] key
POWER ON LINE ERROR
FEED RESTART PAUSE
ON LINE LED (Green)
ERROR LED (Red)
[PAUSE] key
NOTE:
Use the [RESTART] key to resume printing after a pause condition, or after clearing an
error.
The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the printer’s status. Up to 16 characters can be displayed on one line.
There are three LED lights on the Operation Panel.
LED | Illuminates when… | Flashes when… |
POWER | The printer is turned on. | |
ON LINE | The printer is ready to | The printer is |
| print. | communicating with |
|
| your computer. |
ERROR | Any error occurs with | |
| the printer. | |
|
|
There are three keys on the Operation Panel.
PAUSE | Used to stop printing temporarily. |
RESTART | Used to restart printing. |
FEED | Used to feed the media. |
4- 1
