APPENDIX 4 SYSTEM MODE
A4.3
A4.3 Self-Diagnostic
Test (Cont.)
NOTES:
∙If an error occurs, an error message appears, and the printer stops printing. After clearing the error, press the [PAUSE] key to return to “<1>DIAG.”. The printer does not resume printing automatically.
∙See Section A4.7.2 for Self- Diagnostic Test Print sample with detailed descriptions.
NOTES:
∙Make sure that the Top Cover is closed before starting the print head check.
∙If “HEAD ERROR” appears, then print head elements may be damaged. To substain high quality printing, please contact your nearest TOSHIBA TEC service representative for the print head replacement.
∙The print head element check can be performed at the power on time. For selecting this function, refer to Section A4.4 Parameter Setting.
Self-Diagnostic Test and the result print out
When the Maintenance Counter/Parameter Settings is printed, the message returns to “<1>DIAG. Vx.x”. Press the [PAUSE] key twice.
The
$872',$*1267,&
The printer starts the
&+(&.,1*35,17
After printing is completed, the display returns to “<1>DIAG. Vx.x”.
Print head element check
When the
The printer is ready to check the print head to see if there is any problem with the print head. Press the [PAUSE] key to start.
+($'&+(&.
The printer starts checking the print head.
&+(&.,1*
If there is no problem with the print head, the print head check is complete. Press the [PAUSE] key to return to “<1>DIAG. Vx.x”.
1250$/(1'
If there is a problem with the print head, the following message is displayed.
+($'(5525
Press the [PAUSE] key to return to “<1>DIAG. Vx.x”.
A4- 4
