Toshiba B-850 owner manual Back Feed Length Fine Adjustment

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.4 Printer Parameter Fine Adjustment

A4.4 Printer Parameter Fine Adjustment (Cont.)

Back Feed Length Fine Adjustment (Example)

Back Feed Length Fine Adjustment

With this parameter you can fine adjust the Back Feed Length. When “<3>ADJUST SET” appears, press the [PAUSE] key 3 times.

%$&.￿$'-￿￿￿￿￿￿PP￿

[RESTART]

[FEED]

%$&.￿$'-￿￿￿￿￿PP￿ %$&.￿$'-￿￿￿￿￿PP￿

%$&.￿$'-￿￿￿￿￿PP￿

%$&.￿$'-￿￿￿￿￿PP￿ %$&.￿$'-￿￿￿￿￿PP￿

NOTE:

The fine adjustment value equals the sum of the fine adjustment values set by the PC command and this parameter.

The maximum back feed lengthfine adjustment value is ±9.5mm. When the value reaches the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

[FEED] key: Pressing the [FEED] key one time causes a –0.5mm change, up to –9.5 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.5mm change, up to +9.5 mm.

After completing the fine adjustment, press the [PAUSE] key.

A4- 8