Toshiba B-850 owner manual Issue Mode Selection, Label Length Setting, Paper Feed Selection

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.5 Test Print

A4.5 Test Print (Cont.)

NOTE:

Cut mode is available only when the optional cutter module (B- 7208-QM) is installed. When you need the cutter, please contact your nearest TOSHIBA TEC service representative.

NOTE:

Issue Mode Selection

Select the issue mode for the test print by selecting between “[S]NO CUT” (Batch mode without cut) and “[C]WITH CUT” (Cut mode).

7<3(>6@12￿&87￿

[RESTART]	7<3(>6@12￿&87￿	Batch mode
		without cut
[FEED]	7<3(>&@:,7+￿&87￿	Cut mode

After selecting the Issue Mode, press the [PAUSE] key to go to Label Length Setting.

Label Length Setting

Select the label length for the test print in a range from 5 mm to 999 mm.

/$%(/￿/(1￿￿￿￿￿PP￿

Press and hold the [RESTART] or [FEED] key to advance the values quickly and continuously. To stop it, release the key.

[RESTART]

[FEED]

/$%(/￿/(1￿￿￿￿￿PP￿

/$%(/￿/(1￿￿￿￿￿PP￿

NOTE:

When “PAPER FEED” is selected, the printer feeds the media prior to a test print to adjust the print start position. When “PAPER NO FEED” is selected, the printer starts printing without a print start position adjustment. If the print start position adjustment is unnecessary, Select "PAPER NO FEED" and save media.

[FEED] key: Pressing the [FEED] key one time causes a –1 mm change, up to 5 mm.

[RESTART]key: Pressing the [RESTART] key one time causes a +1 mm change, up to 999 mm.

After selecting the label length, press the [PAUSE] key to go to Paper Feed Selection.

Paper Feed Selection

Select whether or not a paper feed is performed.

3$3(5￿)(('￿

[RESTART]	3$3(5￿)(('￿	Paper feed is
		available.
[FEED]	3$3(5￿12￿)(('￿	Paper feed is not
		available.

After selecting the paper feed, press the [PAUSE] key. The display returns to the “<4>TEST PRINT”.

A4-16